The “20, 30, 50 Amp Generator Power Inlet Box” refers to a series of weatherproof, outdoor-rated electrical inlet boxes designed for safely connecting portable generators to a home’s transfer switch or panel during power outages. These boxes eliminate the need for running extension cords through windows or doors, keeping dangerous exhaust fumes (like carbon monoxide) outside. They are NEMA 3R rated for rainproof outdoor use, constructed from heavy-duty steel or durable nylon with anti-corrosion coatings to withstand rain, UV rays, snow, and impacts. All models are ETL Listed for safety and compatibility with standard generator cords.This series is available in multiple configurations to match common generator outlets, including 3-prong and 4-prong setups. They feature a flip-up spring-loaded cover for protection when not in use, pre-drilled mounting holes for easy installation, and generous internal wiring space (often 50% more than standard boxes) to accommodate thick gauge wires (e.g., 6-10 AWG). Many include a green LED power indicator that lights up when connected and powered on, providing clear visual confirmation.

Available Variants and Specifications

The following table summarizes the key models based on amp rating, NEMA connector type, voltage, wattage, and typical applications. Weight is around 1-2 lbs across models.Made with inlet generator plug Twist-locking, Designed for twist locking generator cord, A good partner for the generator to accommodate the power cord, providing and maintaining continuous backup power supply from the generator outside

Applications & Ideal For:

• Home Backup Power: The safe and professional way to connect a portable generator to your home’s transfer switch.
• Workshops & Garages: Provides a dedicated, high-amperage inlet for running heavy-duty tools.
• Construction Sites: A durable and secure power inlet for temporary site power.
• RV Parks and Farms: A reliable power connection point for RVs and agricultural equipment.

Critical Safety Notice & Installation:

This inlet box must be installed by a qualified electrician and must be connected to your main electrical panel through a UL-certified Transfer Switch or Interlock Kit. This is mandatory to isolate your generator from the public utility grid, preventing electrocution hazards for line workers and ensuring compliance with national electrical codes. Never plug a generator directly into a wall outlet.

1. Mount the box on an exterior wall near your generator’s operating spot.
2. Run approved conduit/wire from the box through the wall to your transfer switch.
3. Connect the inlet to hot, neutral, and ground wires (4-wire for 125/250V models).
4. Secure the generator cord into the inlet when in use; flip cover closed when idle.
5. Test with a multimeter before full use. Always turn off the main breaker before connecting.

Generator Power Inlet Box Manufacturer

Our Advantages as a Leading Electrical Plug Manufacturer
With 15+ years as a dedicated power plug and socket factory, we excel in producing types of Generator Plug, Power Cords, Extension Cables with UL (ETL)  certified.

• Guaranteed Market Access: Our UL certification eliminates compliance risks, speeding up your product approval process in the United States and Canada.
• Precision Manufacturing: Produced in our ISO 9001-certified facilities with stringent quality control, including continuity, hi-pot, and insulation resistance tests.
• Customization & Support: We offer OEM/ODM services for custom lengths, colors, and packaging. Benefit from rapid prototyping, low MOQs, and dedicated engineering support.
• Cost-Effective Sourcing: As a direct manufacturer, we provide competitive pricing without compromising on quality or safety.

2-year industrial warranty included; free samples for qualified OEMs. Contact our team for quotes or custom plugs, plug adapters, custom electrical plug builds!

20, 30, 50 Amp Generator Power Inlet Box, NEMA L5-20, L5-30, L6-30, L14-20, L14-30, L14-30P, SS2-50 for Generator Cord, Weatherproof, Outdoor最先出现在Cablesgo。

This compact, direct-molded block-style power adapter (no flexible cable for minimal bulk) features a NEMA L14-30P male plug (4-prong twist-lock, standard on 30A generators for 125/250V output) integrated into four NEMA 5-15R/5-20R female receptacles (T-slot household outlets rated for 20A/125V, compatible with 15A or 20A plugs). It’s designed for safely distributing 110V/120V power from a single generator outlet to multiple devices, such as tools, lights, chargers, or appliances, in space-constrained setups like job sites, camping, emergencies, or RV events. The built-in 20A circuit breaker provides overload protection per outlet or total (model-dependent), automatically resetting to prevent damage from surges or imbalances. ETL Listed (Intertek certified) ensures compliance with UL 498 and UL 62 standards for grounding, impact resistance, and weatherproofing. Custom color options (e.g., black, yellow, red, or Pantone-matched) are available via OEM for branding or visibility. The no-cable design offers a secure, low-profile connection, ideal for direct generator-to-multi-outlet use without tangling.

Key Use Case: Plug the L14-30P male end directly into your 30A generator outlet, then connect up to four household devices to the 5-15R/5-20R outlets for balanced power distribution. Excellent for construction crews or tailgaters needing quick multi-tool access without extensions.

Technical Specifications

• Input Connector: NEMA L14-30P (4-wire, 3-pole + ground, Male Twist-Lock Plug).
• Output Receptacles: Four (4) x NEMA 5-15/20R Duplex Outlets (T-Slot configuration to accept both 5-15P and 5-20P plugs).
• Electrical Rating (Input): 30 Amps, 125/250 Volts AC.
• Circuit Breaker: Built-in, Re-settable 20-Amp thermal circuit breaker.
• Safety Standards: ETL Listed.
• Housing Material: High-Impact, Flame-Retardant Composite (94V-0 Rated).
• Operating Temperature: -20°C to 60°C (-4°F to 140°F).
• Cord Connection: Adapter Only – Power Cord Not Included.

Power Adapter Applications:

• Construction Sites: Power multiple tools, work lights, and chargers from a single generator or power outlet.
• Live Events & Entertainment: Distribute power for audio/visual equipment, stage lighting, and peripherals.
• Workshops & Garages: Create a centralized, protected power hub for various tools and machinery.
• Film & Photo Production: Provide reliable, multi-outlet power for on-location shoots.
• Agricultural & Industrial Settings: Power equipment in barns, workshops, and processing areas.

Important Usage Notes & Warnings:

• Total Load Limit: The combined load of all devices plugged into the adapter MUST NOT exceed the 20-amp rating of the internal circuit breaker. The maximum total power is 5000W at 250V or 2500W at 125V per leg.
• Proper Source Required: This adapter must only be plugged into a properly wired and grounded NEMA L14-30R receptacle on a circuit protected by a 30-amp breaker.
• Power Distribution: The L14-30 plug supplies two 125V legs. The four outlets are typically split across these two legs to balance the load. Consult the wiring diagram for specific configuration.
• No Daisy-Chaining: Do not connect this adapter to another power strip or adapter. This can lead to overload and fire hazard.
• Regular Inspection: Inspect the adapter before each use for any signs of damage, such as cracks, burns, or exposed wiring. Do not use if damaged.
• Professional Use Recommended: Installation and use should be performed by qualified personnel who understand electrical systems and load calculations.

NEMA L14-30P Power Adapter Manufacturer

Our Advantages as a Leading Power Adapter Manufacturer
With 15+ years as a dedicated power cord factory, we excel in producing NEMA L14-30 to NEMA 5-15, 5-20 T-Blade Plug Adapter with ETL certified.

• Guaranteed Market Access: Our UL certification eliminates compliance risks, speeding up your product approval process in the United States and Canada.
• Precision Manufacturing: Produced in our ISO 9001-certified facilities with stringent quality control, including continuity, hi-pot, and insulation resistance tests.
• Customization & Support: We offer OEM/ODM services for custom lengths, colors, and packaging. Benefit from rapid prototyping, low MOQs, and dedicated engineering support.
• Cost-Effective Sourcing: As a direct manufacturer, we provide competitive pricing without compromising on quality or safety.

2-year industrial warranty included; free samples for qualified OEMs. Contact our team for quotes or custom power adapter, plug adapters, sockets adapter builds!

NEMA L14-30P Male to 4X 5-15R/5-20R Overload Protection Power Adapter, Twist Locking to Multiple Household Outlet 20 Amp Circuit Breaker最先出现在Cablesgo。

This compact, block-style generator distribution adapter (direct-molded connector with no flexible cable) features a NEMA L14-30P male plug (4-prong twist-lock, standard on 30A generators for 125/250V output) integrated directly into four NEMA 5-20R/5-15R female receptacles (T-slot household outlets rated for 20A/125V, compatible with both 15A and 20A plugs). It’s designed for safely powering multiple 110V/120V devices—like power tools, lights, chargers, fridges, or fans—from a single generator outlet in tight spaces, such as during camping, construction sites, emergencies, or RV tailgating. The no-cable block design provides a secure, low-profile connection to prevent accidental unplugging, with the multi-outlet head expanding one 30A source into four household ports without added bulk. ETL Listed (Intertek certified) verifies compliance with UL 498 and UL 62 standards for electrical safety, including grounding, weather resistance, and overload protection. The molded construction ensures durability for outdoor use, with options for custom lengths if needed, but this version prioritizes portability.

Key Use Case:Insert the L14-30P male end into your generator’s 30A outlet, then plug up to four household devices directly into the integrated 5-20R/5-15R outlets for instant distributed power. Perfect for job sites or events where space is limited and one generator needs to feed multiple tools without extension cords.

Technical Specifications

• Male: NEMA L14-30P (4-prong twist-lock, 30A/125-250V, two hots/neutral/ground);
• Female: 4x NEMA 5-15R/5-20R (T-slot receptacles, each 20A/125V, accepts 15A or 20A plugs).
• Voltage Rating:125V AC (120V compatible; input supports 125/250V for generator flexibility).
• Current Rating: 30A maximum total (input passthrough; each outlet rated 20A, but distribute loads evenly to avoid exceeding 30A aggregate).
• Internal Conductors: 10 AWG pure copper (4-conductor input to 3-conductor output; direct molded without flexible wire).
• Certifications: ETL Listed (primary)
• Material: Heavy-duty molded PVC housing; nickel-plated brass contacts for corrosion resistance; strain relief and ergonomic twist-lock handle.
• Color: Standard black; custom colors available (e.g., yellow for visibility, any Pantone match via OEM).

Intended Use & Applications

• Job Sites: Power multiple tools (saws, drills, chargers, work lights) from a single generator outlet.
• Emergency Power at Home: Run essential appliances like refrigerators, fans, and communication devices during a power outage.
• Events & Recreation: Ideal for powering equipment at food trucks, concession stands, outdoor markets, tailgating parties, and campsites.
• Workshop: Create a convenient multi-outlet station from a single high-capacity source.

Critical Safety Warnings & Usage Instructions

• POWER MANAGEMENT IS ESSENTIAL: This is a POWER DISTRIBUTION ADAPTER, not a power multiplier. The total current drawn from all four outlets combined MUST NOT exceed the adapter’s 30-amp input rating.
  • Example: If you are drawing 15 amps from two outlets, you are already at the 30-amp maximum. The built-in breaker will trip if you exceed this limit.
• Understand the Power Source: The L14-30P plug provides 125/250V. This adapter correctly splits this into separate 125V legs, supplying 120V to the standard outlets.
• Use the Built-in Breaker: The integrated 30-amp circuit breaker is your primary safety device. If it trips, unplug devices and reduce the total load before resetting.
• Do Not Use with an RV’s 30-amp TT-30 Inlet Directly: This adapter is designed to plug into a Generator (L14-30R outlet) and power devices with standard plugs. To power an RV from a generator, you would need a different adapter (e.g., L14-30P to TT-30R).
• Intended for Temporary Use: This adapter is for temporary power distribution. Keep it dry and do not use it in wet conditions. Always inspect for damage before use.

NEMA L14-30P Power Adapter Manufacturer

Our Advantages as a Leading Power Adapter Manufacturer
With 15+ years as a dedicated power cord factory, we excel in producing NEMA L14-30 to NEMA 5-15, 5-20 T-Blade Plug Adapter with ETL certified.

• Guaranteed Market Access: Our UL certification eliminates compliance risks, speeding up your product approval process in the United States and Canada.
• Precision Manufacturing: Produced in our ISO 9001-certified facilities with stringent quality control, including continuity, hi-pot, and insulation resistance tests.
• Customization & Support: We offer OEM/ODM services for custom lengths, colors, and packaging. Benefit from rapid prototyping, low MOQs, and dedicated engineering support.
• Cost-Effective Sourcing: As a direct manufacturer, we provide competitive pricing without compromising on quality or safety.

2-year industrial warranty included; free samples for qualified OEMs. Contact our team for quotes or custom power adapter, plug adapters, sockets adapter builds!

NEMA L14-30P to 4X 5-20R/5-15R Generator Adapter, 4 Prong 30 Amp to 110V,Twist Locking to 15 Amp/20 Amp Household Outlet最先出现在Cablesgo。

This heavy-duty power adapter converts a NEMA L14-30P male plug (4-prong twist-lock, common on generators for 30A/125-250V output) to a NEMA TT-30R female receptacle (3-prong RV standard for 30A/125V shore power). It’s designed for safely connecting portable generators to RVs, campers, caravans, trailers, or boats, allowing full 30A power delivery for boondocking, tailgating, or emergency backup without needing a full extension cord. The 4-prong L14-30P provides neutral, hot, ground, and a second hot for 240V capability, but the TT-30R outputs only 120V (single-phase), so it’s ideal for 120V RV systems—high-draw appliances like AC units or microwaves can run without derating. ETL Certified (Intertek tested) ensures compliance with UL 498 and UL 62 standards for weather resistance, impact, and overload protection.

Key Use Case: Plug the L14-30P male end into your generator’s 30A outlet, then connect your RV’s TT-30P cord to the TT-30R female end. Perfect for weekend warriors or off-grid setups, but verify generator output is 120V/30A to match RV needs.

Technical Specifications

• Male: NEMA L14-30P (4-prong twist-lock, 30A/125-250V, X/Y hot, Z neutral, W ground terminals)
• Female: NEMA TT-30R (3-prong straight-blade receptacle, 30A/125V, hot/neutral/ground).
• Voltage Rating: 125V AC (output to RV; input supports 125/250V for generator compatibility).
• Current Rating: 30A maximum (full passthrough with no derating for 120V loads).
• Power Rating: 3750W maximum (at 125V).
• Internal Conductors: 10 AWG pure copper (4-conductor input to 3-conductor output; direct molded without flexible wire).
• Certifications: ETL Listed (primary)
• Material: Heavy-duty molded PVC housing; nickel-plated brass contacts for corrosion resistance; strain relief and ergonomic twist-lock handle.
• Color: Standard black; custom colors available (e.g., yellow for visibility, any Pantone match via OEM).

Intended Use & Applications

• Safely powering your RV from a portable generator equipped with an L14-30R outlet during camping, tailgating, or power outages.
• Provides a compact, reliable, and safety-certified connection for critical power needs.

Safety Notes:

• Voltage Matching: Outputs 120V only—use with 120V RV setups; bridging hots (X/Y) internally for single-phase delivery from 240V inputs. Verify generator wiring to avoid phase imbalance.
• Maintains full grounding and neutral bonding for surge and shock protection; many include integrated LED indicators for power confirmation.
• ETL certification ensures crush-proof construction and UV resistance; inspect for cracks before use and avoid exceeding 30A loads (e.g., stagger high-draw appliances).
• Complies with NEC Article 551 for RV/generator temporary connections; not for indoor/dry-only or permanent installs. Custom models may include optional circuit breakers.

RV Power Adapter 4 Prong Twist Lock Plug Heavy Duty Converter L14-30P to TT-30R 30A Male Plug to 30A Female Receptacle最先出现在Cablesgo。

This is a heavy-duty power adapter designed for RVs, campers, trailers, or boats with a 30 Amp TT-30P male plug (standard RV shore power connector) to connect safely to a standard 15 Amp NEMA 5-15R household outlet (common 110V/120V wall socket). It allows RV owners to access limited household power for essential loads like lights, fans, or charging without needing a full 30A pedestal—ideal for dry camping, home storage, or emergency use. The ETL Certified designation (from Intertek) verifies compliance with UL standards for electrical safety, including shock, fire, and overload protection. Most models are short-cord designs (10-14 inches) with weatherproof construction for outdoor durability, but note: it derates the RV system to 15A max (1875W), so avoid high-draw appliances like AC units to prevent tripping breakers or overheating.

Key Use Case: Plug the TT-30P male end into your RV’s power inlet, then insert the NEMA 5-15R female end into a garage or home outlet. Some models include LED indicators or built-in surge protection for added convenience.

Technical Specifications

• Input (Male Plug): TT-30, 125 Volt, 30 Amp
• Output (Female Receptacle): NEMA 5-15R, 125 Volt, 15 Amp
• Cord Length: Typically 12 inches (please confirm specific length for your product)
• Wire Gauge: Heavy-duty 10 AWG or 12 AWG wiring for safe current carrying capacity.
• Safety Certification: ETL Listed
• Compatibility: Designed for use with 125V RV systems only. Not for use with 250V systems.

Intended Use & Applications

• Powering your RV from a standard garage, workshop, or outdoor household outlet.
• Use at campsites or locations that lack a dedicated 30-amp RV power pedestal.
• Allows for running essential 110V appliances and electronics in your RV (e.g., lights, TV, phone chargers, microwave with caution).

Important Safety Warnings & Usage Limitations

1. DO NOT EXCEED 15 AMPS: This adapter does not increase the available power. The circuit you are plugging into is limited to 15 amps. You must manage your RV’s power consumption to avoid overloading the circuit and tripping a breaker.
2. Power Management is Critical: You cannot run multiple high-wattage appliances simultaneously (e.g., Air Conditioner + Microwave + Water Heater). This will likely trip the 15-amp breaker. You may need to run appliances one at a time.
3. Check for Voltage: Ensure your RV is designed for 125V service. This adapter is not for use with 250V RV systems.
4. Inspect Before Use: Always inspect the adapter and cords for any signs of damage, cracking, or overheating before each use.
5. Do Not Use in Rain/Snow: Keep the connection dry and protected from the elements.

RV Power Adapter 30 amp to 110 Adapter | TT-30P to NEMA 5-15R | 30A Male to 15A Female最先出现在Cablesgo。

This compact power adapter converts a standard NEMA 5-15P male plug (common 15A, 3-prong grounded household plug used in North American 120V outlets) to a NEMA 5-15/20R female receptacle (20A T-blade or T-slot outlet, compatible with both 15A and 20A plugs). It’s designed for safely connecting devices with 20A T-blade plugs—such as high-power appliances, tools, or extension cords rated for 20A—to a standard 15A wall outlet without needing a full replacement cord. The ETL Listed certification (from Intertek) confirms it meets rigorous safety standards for electrical shock, fire prevention, and grounding, equivalent to UL approval. Ideal for home garages, workshops, kitchens, or offices where you need to “upgrade” a 15A outlet temporarily for 20A equipment, but remember: the overall rating is limited to 15A due to the input plug.Key Use Case: If your device has a NEMA 5-20P plug (T-shaped hot blade for 20A circuits), this adapter lets it draw power from a 15A NEMA 5-15R wall socket. However, it cannot provide more than 15A—exceeding this risks overheating the adapter or tripping breakers.

Technical Specifications:

• Male: NEMA 5-15P (3-prong grounded, 15A/125V plug)
• Female: NEMA 5-15/20R (T-blade/T-slot receptacle, accepts 15A or 20A plugs)
• Electrical Rating: 15A maximum (input limit; receptacle supports up to 20A, but do not exceed 15A total load)
• Safety Standards: ETL Listed per applicable UL standards.
• Housing Material: Flame-Retardant PC/ABS Alloy (94V-0 Rated).
• Contact Material: High-Current Copper Alloy with Silver Plating.

Power Adapter Applications:

• Office Environments: Power multiple devices from a single 20-amp circuit
• Workshops & Garages: Adapt 20-amp outlets for standard tool usage
• Data Centers: Connect 15-amp equipment to 20-amp PDU outlets
• Home Theater Setup: Power audio/video equipment from dedicated 20-amp circuits
• Kitchen Applications: Use small appliances on 20-amp kitchen circuits
• Commercial Spaces: Adapt specialized 20-amp outlets for general use

Important Usage Notes:

• Circuit Capacity Warning: This adapter does not increase the circuit capacity. The total load connected to the adapter must not exceed 15 amps, even when plugged into a 20-amp circuit.
• Proper Installation: Ensure the wall outlet is properly grounded before use
• Load Management: Do not exceed the 15-amp/1875-watt maximum rating of the adapter
• Single Use: Do not daisy-chain multiple adapters or power strips
• Inspection: Regularly check for signs of overheating or damage during use
• Outlet Compatibility: Only use with properly installed 15-amp or 20-amp grounded outlets

NEMA 5-15P to 5-15/20R (20Amp T Blade) | 15 Amp Household Plug to 20 Amp T-Blade Power Plug Adapter | ETL Listed最先出现在Cablesgo。

This is a specialized power adapter designed for connecting equipment with IEC 60320 C14 plugs (such as servers, networking gear, industrial printers, or high-voltage AV systems) to a NEMA 6-15R receptacle (a 15A/250V, 240V-rated outlet common in North America for heavier-duty applications like dryers, welders, or data centers). The “Right Angle” refers to the IEC C13 receptacle, which is angled at 90° for space-saving installation in tight spots like server racks or behind equipment. It’s a compact plug adapter, often in block or short-cord style (minimal or no flexible cable, typically 1-3 feet if any), ETL Listed for safety compliance (tested by Intertek for electrical hazards, equivalent to UL standards). This ensures reliable grounding and protection against overloads. Ideal for IT environments, workshops, or home setups requiring 240V without bulky cords.

Technical Specifications:

• Input Connector: NEMA 6-15P Male Plug, featuring two horizontal blades.
• Output Connector: IEC 60320 C13 Female Receptacle.
• Electrical Rating: 15 Amps, 250 Volts AC. Maximum Power Capacity: 3750 Watts.
• Safety Standards: ETL Listed per applicable UL standards.
• Housing Material: Flame-Retardant PC/ABS Alloy (94V-0 Rated).
• Contact Material: High-Current Copper Alloy with Silver Plating.
• Cord Gripper: Integrated strain relief design to protect the internal connections from pull and twist.
• Configuration: Right-Angle Plug orientation.

Power Adapter Applications:

• Data Center Server Racks: Perfect for connecting 208V/240V server and network equipment in space-constrained rack cabinets.
• High-Voltage IT Equipment: Powers devices specifically designed for a NEMA 6-15 outlet.
• Professional Audio/Video Rigs: Connects high-power amplifiers and processing gear in organized A/V racks.
• Industrial Machinery & Workstations: Used with lab equipment, CNC machine controllers, and other 250V commercial devices.
• Power Distribution Unit (PDU) Connectivity: Facilitates neat and efficient connections to 250V PDUs.

Important Usage Notes:

• Voltage Warning: This adapter is designed for 250V NEMA 6-15 outlets only. Do not attempt to plug it into a standard 125V NEMA 5-15 outlet, as the plug configuration is incompatible and could damage equipment.
• Power Rating: Ensure the connected device’s power consumption does not exceed the 15A / 3750W rating.
• Not an Extension: This is a plug adapter. A separate IEC C13 to C14 power cord is required to connect your equipment to this adapter.
• Inspection: Always inspect the adapter for any signs of damage before use.

NEMA 6-15 Plug To IEC 60320 C13 Receptacle (Right Angle) | Power Plug Adapter | ETL Listed最先出现在Cablesgo。

This is a compact, block-style power adapter (also called a pigtail or direct connector adapter) that converts a standard North American NEMA 5-15 wall outlet to an IEC 60320 C13 receptacle for powering devices with IEC C14 plugs, such as computers, monitors, servers, or AV equipment. Unlike extension cords, it has no cable length—just the molded plug and receptacle connected directly (typically 2-4 inches overall, with minimal or no flexible wire between ends). The “UL Listed” certification ensures it complies with safety standards from Underwriters Laboratories for electrical shock and fire hazards. It’s perfect for tight spaces in racks, desks, or behind furniture where a full cord would be cumbersome.

Technical Specifications:

• Input Connector: Standard NEMA 5-15P Male Plug.
• Output Connector: IEC 60320 C13 Female Receptacle.
• Electrical Rating: 15 Amps, 125 Volts AC, 60 Hz. Maximum Power Rating: 1875 Watts.
• Safety Certifications: UL Listed and cUL US, ensuring compliance with U.S. and Canadian safety standards.
• Housing Material: Constructed from high-grade, flame-retardant PVC (94V-0 rated).
• Contact Material: Precision-engineered copper alloy with silver plating for optimal conductivity and durability.
• Operating Temperature Range: -25°C to 85°C (-13°F to 185°F).
• Available Configurations: Offered in both Straight and Right-Angle plug designs to suit various installation requirements.

Applications:

This adapter is designed for a variety of professional and commercial applications, including:

• Connating a UPS with a C13 output to a standard wall outlet.
• Replacing a damaged or lost original IEC C14 power cord inlet on a device.
• Data Center & Server Racks: Managing power connections in space-constrained rack environments (Right-Angle model is ideal).
• Office Workstations: Powering desktop computers, monitors, and printers.
• Audio/Video Equipment: Connecting pro-A/V gear that uses a C13 inlet.
• Network Switches & Peripherals

Important Usage Notes:

• This product is an adapter and does not extend cable length. A standard NEMA 5-15 power cord is required to connect the adapter to the wall outlet.
• Ensure the total power draw of the connected equipment does not exceed the 15A/1875W rating.
• Do not daisy-chain multiple adapters or power strips, as this can create a fire hazard.
• Always inspect for damage before use.

NEMA 5-15 Plug To IEC 60320 C13 Receptacle (Right Angle) | Power Plug Adapter | UL Listed最先出现在Cablesgo。