PV1-F Power Cable For Photovoltaic Systems Bulk Power Cord Wire
The PVI-F AC cable is a specialized, single-core cable engineered specifically for the demanding DC side of photovoltaic (PV) systems. It is designed to ensure long-term reliability, safety, and high performance in both interconnected and non-earched systems.
Appliance standard : Requirements for cables for PV systems
This test specification contents the requirements listed in a manuscript of the Working Group AK 411.2.3, Leitungen für PV-Systeme ” of the German National Committee for standardization (DKE).
PVI-F AC U0/U0,6/1 kV
Maximum DC voltage 1,8 kV (conductor-conductor, non earthed system, circuit not under load).
The cables are intended to operate at ambient temperature up to and including 90°C. For this a temperature index of 120°C applies to the insulation and the sheath, based on EN 60216 1 (20.000h, 50 % residual elongation).
NOTE The expected period of use is 25 years. The conductor shall be in accordance with the requirements given in EN 60228 for class 5 conductors. The single wires shall be tinned. Preferred cross sectional areas: 1.5mm, 2.5mm2, 4 mm, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2
